看诗词>英语词典>tin can翻译和用法

tin can

英 [ˌtɪn ˈkæn]

美 [ˌtɪn ˈkæn]

网络  马口铁罐; 罐頭; 锡罐; 铁罐; 废弃的易拉罐

英英释义

noun

  • airtight sealed metal container for food or drink or paint etc.
      Synonym:cantin
    1. informal term for a destroyer

      双语例句

      • Tin can lids were tacked over holes in the floor to keep warm air inside and to keep cold wind and mice outside.
        马口铁罐头盒盖子被固定在地板上,一是为了室内保温,二是挡住冷风和老鼠。
      • Tin can improve the brass strength and corrosion resistance of the sea, therefore calls navy brass, used for ship thermal technology equipment and propeller, etc.
        锡能提高黄铜的强度和对海水的耐腐性,故称海军黄铜,用作船舶热工设备和螺旋桨等。
      • A cylindrical tin with an opened upper end and raised edges is separated, and then the cylindrical tin can simultaneously contain a plurality of granular objects.
        将上端开口且边缘外突的圆柱罐进行分隔,使它能同时装纳多种颗粒状物品;
      • As stripping trace tin time after time, the rate recovery of tin can be increased, and achieved the aim of the separation and enrichment of trace tin and trace germanium.
        通过多次反萃取可以提高锡的回收率,达到了微量锡与微量锗分离富集的目的。
      • He beat out a tune on a tin can.
        他在易拉罐上敲出一首曲子。
      • The results show that under the optimum conditions the removal rate of tin can reach 100% and the loss of indium in sulphuration residue is only 0.47%.
        在此条件下,除锡率可达100%,铟在渣中的损失率仅为0.47%。
      • It is shown from thermodynamics calculation that TiN can be formed during solidification and the initial oxygen content is 30 × 10-6 at least for the residual titanium removing from molten steel.
        热力学计算表明:轴承钢中TiN主要是在凝固过程中形成。如果要用钢中残余氧含量来氧化去除钢中残余钛,需要的初始氧含量为30×10-6。
      • Properties of mechanical films such as TiN can be effectively improved by using multilayers.
        采用多层膜系是进一步提高诸如TiN等力学薄膜性能的有效方法之一。
      • If you ever made a "tin can" telephone when you were a kid, you have an idea of what I'm going to be talking about.
        如果你小时候曾经做过一个易拉罐电话的话,你就可以大致了解我接下来想说的意思了。
      • A compact laser modified surface coating reinforced with fine TiN can be achieved with optimum process parameters.
        选择适当的激光辐照工艺参数,获得致密的TiN增强金属基复合材料激光改性层。